MIT creates the first flying microrobot with its own sensors and computer, capable of operating outside the laboratory

rss · Infobae 2026-11-19T16:41:14Z es
Researchers at the Massachusetts Institute of Technology (MIT) designed a flapping-wing aerial microrobot with onboard sensors and computing, capable of following a complex trajectory and landing precisely on a sunflower without relying on the external camera system used until now in the laboratory. Although it still receives power from an external source, the breakthrough opens the door to practical uses in environments that larger robots cannot reach, MIT News, the institute's news portal, reported. The vehicle weighs less than a paper clip and is similar in size and shape to a microcassette. Its four wings are moved by soft actuators, artificial muscles that flap rapidly and allow it to perform detailed maneuvers. The researchers redesigned those actuators so the robot could carry the necessary electronics and fly autonomously. They enlarged them by 50%, which translated into 46% more lift force —that is, greater capacity to lift weight and stay in the air—. With that improvement, the robot achieved a lift-to-weight ratio of 1.9, enough to carry an electronic package of just 244 milligrams. The system also incorporates an inertial measurement unit to estimate its orientation, an optical flow sensor that calculates lateral speed and position, and a time-of-flight sensor that measures altitude. These components allow the device to…
MIT researchers developed an aerial microrobot with onboard sensors and a computer that does away with external navigation systems (Image: Courtesy of the researchers / MIT News) Researchers at the Massachusetts Institute of Technology (MIT) designed a flapping-wing aerial microrobot with onboard sensors and computing, capable of following a complex trajectory and landing precisely on a sunflower without relying on the external camera system used until now in the laboratory. Although it still receives power from an external source, the breakthrough opens the door to practical uses in environments that larger robots cannot reach, MIT News, the institute's news outlet, reported. The vehicle weighs less than a paper clip and is similar in size and shape to a microcassette. Its four wings are moved by soft actuators, artificial muscles that beat rapidly and allow it to perform detailed maneuvers. The researchers redesigned those actuators so the robot could carry the necessary electronics and fly autonomously. They enlarged them by 50%, which translated into 46% more lift force — that is, greater capacity to carry weight and stay airborne. With that improvement, the robot achieved a lift-to-weight ratio of 1.9, enough to carry an electronic package of just 244 milligrams. The system also incorporates an inertial measurement unit to estimate its orientation, an optical flow sensor that calculates lateral speed and position, and a time-of-flight sensor that measures altitude. These components allow the device to perceive its motion and perform calculations during flight. "This is a very important milestone for the research community. It is the first demonstration of an autonomous aerial microrobot in perception and computing," said Kevin Chen, associate professor in MIT's Department of Electrical Engineering and Computer Science and director of the Soft and Micro Robotics Laboratory within the Research Laboratory of Electronics. Chen noted that there are tasks, such as pollination or industrial surveillance, for which a larger robot cannot be used. "Small-scale robots are especially suited for this type of work, and if this technological line succeeds in the future, it could be very promising," he said. The device weighs less than a paper clip and uses actuators that increase lift force by 46% (Image: Courtesy of the researchers / MIT News) The aerial microrobots developed by MIT over the past decade could move with speed, agility, and endurance comparable to those of a bumblebee. However, they depended on a motion capture system installed in the laboratory, which restricted them to operating only in that controlled environment and limited their applicability in real-world situations. In doing away with that system to operate in real environments, a new obstacle arose: onboard sensors do not replicate its precision, so the robot can drift off its path even while measuring motion, orientation, and altitude. The team then designed an algorithm that processes the data from those sensors and estimates the robot's orientation, angular velocity, and position extremely quickly, which simplifies the calculations to reduce computational cost, and prioritizes continuous, fast estimates, which yielded better results than more precise but slower measurements. "We spent a lot of time optimizing the selection of sensors and position estimators so that the robot would have very low drift," explained Yi-Hsuan Hsiao, an MIT graduate student and one of the lead authors. "It can now fly with positional precision comparable to what it achieves with external cameras." The sensors and computing components were mounted on a fiberglass substrate, a decision intended to prevent the robot's vibrations from disrupting the electronics' operation. Jonathan P. How, the Ford Professor of Aeronautics and Astronautics at MIT and principal investigator in the Laboratory for Information and Decision Systems and the Aerospace Controls Laboratory, emphasized the design constraints: "When you're dealing with such a small computer, you have to think carefully about every detail. It must handle both perception and control, fit on the robot, and operate at the speed needed to keep the vehicle stable during flight," How said. The onboard instrumentation combines an inertial unit with optical flow and time-of-flight sensors to track the trajectory (Image: Courtesy of the researchers / MIT News) The tests included hovering flights at different heights and trajectories between designated points. The device moved quickly and precisely, with position errors of only a few centimeters. The researchers also used a joystick to send general position commands and guide the vehicle around several plants before it carefully landed on a sunflower. The demonstration aimed to show its potential for artificial pollination. In the future, these robots could move among almond trees or blueberry bushes to pollinate delicate flowers in regions where natural pollinator populations have been decimated by habitat loss. They could also hover near plants without damaging them, monitor crop conditions, and identify pests before they spread. An analysis of energy consumption determined that the electronics use about 6% of the total power. The rest powers the robot's artificial muscles and wings. Further reducing that consumption would make it possible to add components such as a camera for object recognition. The group is now working on integrating that device so the vehicle can identify objects and avoid obstacles autonomously, in addition to incorporating power electronics and batteries that would enable untethered flight in outdoor environments. The research, published in Science Robotics, was conducted by Hsiao, Quang Phuc Kieu, and Zhongtao Guan as lead authors, along with Chen, How, Elizabeth Farrell Helbling, an assistant professor at Cornell University, and other MIT members.

Translated from es by z-ai/glm-5.3-flash

Highlight